2 306 ₽
без НДС
В налич.: 10+Под заказВремя обработки: Около 15 раб. днейHT: Около 15 раб. днейВремя обработки: Около 30 раб. днейHT: Около 30 раб. дней
Добавить в желаемоеpaypalVisaVisa ElectronMasterCardMaestro
Есть вопрос по товару?
К оплате принимаются карты Visa, MasterCard, а так же платежная система PayPal или Банковский перевод. Все заказы обрабатываются по предоплате. До момента получения платежа товары не резервируются.
Мы доставляем товары по всему миру. Способ доставки (курьером или почтой) зависит от вашей страны проживания. Стоимость доставки включается в счет автоматически и зависит от веса посылки.
В некоторых случаях мы не можем определить вес посылки в автоматическом режиме. В этих случая менеджер свяжется с Вами и предложит специальную условия поставки.

Brake Disc

Артикул: V30-80091

VAICO
Поставщик: VAICO
Brake Disc VAICO V30-80091
Brake Disc VAICO V30-80091 main

Информация о товаре

Bolt Hole Circle Ø [mm]:
69 mm
Brake Disc Thickness [mm]:
26 mm
Brake Disc Type:
Vented
Diameter [mm]:
280,8 mm
Fitting Position:
Front Axle
Height [mm]:
46,6 mm
Minimum thickness [mm]:
23,5 mm
Number of Holes:
4
Packaging Depth [cm]:
30 cm
Packaging height [cm]:
10 cm
Packaging width [cm]:
30 cm
Weight [kg]:
7,478 kg
Additional Info:
Brake components such as brake disks, brake pads, etc., checked with regard to clearance and the wheel hub with, claims for brake parts are only reviewed with an, For brake disks and brake pads, the break-in requirements, If the vehicle is no longer in its original condition due to, In the warranty, we always make a distinction between wear, installation instructions., installation invoice and a record of the wheel hub run-out, Installation may only be carried out by trained specialist, maximum of 1000 km (break-in period). Therefore, warranty, measurement, including photos., parts and vehicle parts. All wear parts are subject to a, personnel., Please note that our products are usually delivered without, produced., Products supplied by us are without exception intended for, reduced warranty period and a maximum mileage., regard to wobble, and the appropriate documentation must be, specified by the vehicle manufacturer must be observed., the designated use., the entitlement to make warranty claims is lost due to, There is no guarantee for inappropriate, improper or, third-party work. The same warranty claims are lost if the, tuning work such as wheel accessories and tracking plates,, unintended use., vehicle is used for motor sports or similar events., When replacing brakes, the chassis components must always be
EAN:
4046001550652
Категория:
Тормозной Диск
Состояние:
Новый
Номер детали:
V3080091
Производитель
Код
BLUE PRINT
ADC443108
DELPHI
BG4127
FEBI BILSTEIN
44120
HELLA
8DD 355 116-531
METELLI
23-1236C
MEYLE
32-15 521 0014/PD
MITSUBISHI
46 05A 180
REMSA
61097.10
SMART
A454 421 03 12
SMART
454 421 03 12
TEXTAR
92176303
TRUSTING
DF1263
TRW
DF4311
VAICO
V30-80091
VALEO
197746
ПроизводительМодельEngine codeFuelDisplacementHPкВтГод
MITSUBISHICOLT CZC Кабриолет (RG)4G15TPetrol1.5150hp110kw2006-2009
MITSUBISHICOLT VI (Z3_A, Z2_A)4G15TPetrol1.5150hp110kw2005-2012
SMARTFORFOUR (454)M 122.950Petrol1.5177hp130kw2005-2006

ПОХОЖИЕ ТОВАРЫ

no imageMERCEDES-BENZТормозной ДискMERCEDES-BENZАртикул: 4544210312Доп. Инфо: КОМПЛЕКТ = 2 ШТУК
17 083 ₽
без НДС
Под заказВремя обработки: Около 15 раб. днейHT: Около 15 раб. дней
Добавить в желаемоеpaypalVisaVisa ElectronMasterCardMaestro
Brake Disc SWAG 12944120SWAGBrake DiscSWAGАртикул: 12944120Bolt Hole Circle Ø [mm]: 114,3 mmBrake Disc Thickness [mm]: 26 mmBrake Disc Type: Internally VentedCentering Diameter [mm]: 69 mmFitting Position: Front AxleMinimum thickness [mm]: 23,5 mmNumber of mounting bores: 4Outer diameter [mm]: 281,0 mmQuantity: 2Surface: CoatedThickness [mm]: 46,6 mmWeight [kg]: 6,6 kgAdditional Info: intended and not modified for purpose. Please ensure the, products are installed by a competent individual. N.B., products are usually supplied without fitting instructions., These products are designed to be used as originally
2 169 ₽
без НДС
Под заказВремя обработки: Около 30 раб. днейHT: Около 30 раб. дней
Добавить в желаемоеpaypalVisaVisa ElectronMasterCardMaestro
Brake Disc FEBI BILSTEIN 44120FEBI BILSTEINBrake DiscFEBI BILSTEINАртикул: 44120Bolt Hole Circle Ø [mm]: 114,3 mmBrake Disc Thickness [mm]: 26 mmBrake Disc Type: Internally VentedCentering Diameter [mm]: 69 mmFitting Position: Front AxleMinimum thickness [mm]: 23,5 mmNumber of mounting bores: 4Outer diameter [mm]: 281,0 mmQuantity: 2Surface: CoatedThickness [mm]: 46,6 mmWeight [kg]: 6,6 kgAdditional Info: intended and not modified for purpose. Please ensure the, products are installed by a competent individual. N.B., products are usually supplied without fitting instructions., These products are designed to be used as originally
2 314 ₽
без НДС
В налич.: 8Под заказВремя обработки: Около 10 раб. днейHT: Около 10 раб. днейВремя обработки: Около 30 раб. днейHT: Около 30 раб. дней
Добавить в желаемоеpaypalVisaVisa ElectronMasterCardMaestro
Brake Disc DELPHI BG4127DELPHIBrake DiscDELPHIАртикул: BG4127Brake Disc Thickness [mm]: 26 mmBrake Disc Type: VentedCentering Diameter [mm]: 69 mmDepth [mm]: 46,5 mmDiameter [mm]: 281 mmfulfils test standard: R90 ApprovedMinimum thickness [mm]: 23,5 mmMounting Type: BoltedNumber of Holes: 4
2 296 ₽
без НДС
В налич.: 5Под заказВремя обработки: Около 10 раб. днейHT: Около 10 раб. днейВремя обработки: Около 30 раб. днейHT: Около 30 раб. дней
Добавить в желаемоеpaypalVisaVisa ElectronMasterCardMaestro
Brake Disc BLUE PRINT ADC443108BLUE PRINTBrake DiscBLUE PRINTАртикул: ADC443108Bolt Hole Circle Ø [mm]: 114,3 mmBrake Disc Thickness [mm]: 26 mmBrake Disc Type: Internally VentedCentering Diameter [mm]: 69 mmFitting Position: Front AxleMinimum thickness [mm]: 23,5 mmNumber of mounting bores: 4Outer diameter [mm]: 281,0 mmQuantity: 2Surface: CoatedThickness [mm]: 46,6 mmWeight [kg]: 6,6 kgAdditional Info: intended and not modified for purpose. Please ensure the, products are installed by a competent individual. N.B., products are usually supplied without fitting instructions., These products are designed to be used as originally
2 008 ₽
без НДС
В налич.: 10В налич.: 10Под заказГотов к отправкеВремя обработки: Около 10 раб. днейHT: Около 10 раб. днейВремя обработки: Около 30 раб. днейHT: Около 30 раб. дней
Добавить в желаемоеpaypalVisaVisa ElectronMasterCardMaestro
Тормозной диск TRISCAN 8120101026TRISCANТормозной дискTRISCANАртикул: 8120101026Минимальная толщина [мм]: 23.5 ммДиаметр центрирования [мм]: 69 ммТолщина тормозного диска (мм): 26 ммТип тормозного диска: вентилируемыйВысота [мм]: 46.5 ммДиаметр [мм]: 281 мм
2 884 ₽
без НДС
В налич.: 1Под заказВремя обработки: Около 10 раб. днейHT: Около 10 раб. днейВремя обработки: Около 30 раб. днейHT: Около 30 раб. дней
Добавить в желаемоеpaypalVisaVisa ElectronMasterCardMaestro
Тормозной диск TRISCAN 8120101026CTRISCANТормозной дискTRISCANАртикул: 8120101026CМинимальная толщина [мм]: 23.5 ммДиаметр центрирования [мм]: 69 ммТолщина тормозного диска (мм): 26 ммТип тормозного диска: вентилируемыйВысота [мм]: 46.5 ммДиаметр [мм]: 281 мм
3 429 ₽
без НДС
В налич.: 8Под заказВремя обработки: Около 10 раб. днейHT: Около 10 раб. днейВремя обработки: Около 30 раб. днейHT: Около 30 раб. дней
Добавить в желаемоеpaypalVisaVisa ElectronMasterCardMaestro
Brake Disc VALEO 197631VALEOBrake DiscVALEOАртикул: 197631Fitting Position: Front AxleBrake Disc Type: VentedOuter diameter [mm]: 280.8 mmBrake Disc Thickness [mm]: 26 mmCentering Diameter [mm]: 69 mmHeight [mm]: 46.6 mmMinimum thickness [mm]: 23.5 mmRim Hole Number: 4 -HoleWeight [kg]: 13.97 kg
4 255 ₽
без НДС
Под заказВремя обработки: 20-30 раб. днейHT: 20-30 раб. дней
Добавить в желаемоеpaypalVisaVisa ElectronMasterCardMaestro

VAICO Тормозной диск

Brake Disc VAICO V10-40018VAICOBrake DiscVAICOАртикул: V10-40018Bolt Hole Circle Ø [mm]: 112 mmBrake Disc Hub Height [mm]: 54 mmBrake Disc Thickness [mm]: 10 mmBrake Disc Type: SolidCentering Diameter [mm]: 68 mmFitting Position: Rear AxleHeight [mm]: 64,2 mmMinimum thickness [mm]: 8 mmOuter diameter [mm]: 245 mmPackaging Depth [cm]: 26 cmPackaging height [cm]: 13 cmPackaging width [cm]: 26 cmRim Hole Number: 5 -HoleAdditional Info: claims for brake parts are only reviewed with an, Brake components such as brake disks, brake pads, etc., checked with regard to clearance and the wheel hub with, For brake disks and brake pads, the break-in requirements, If the vehicle is no longer in its original condition due to, In the warranty, we always make a distinction between wear, installation instructions., installation invoice and a record of the wheel hub run-out, Installation may only be carried out by trained specialist, maximum of 1000 km (break-in period). Therefore, warranty, measurement, including photos., parts and vehicle parts. All wear parts are subject to a, personnel., Please note that our products are usually delivered without, produced., Products supplied by us are without exception intended for, reduced warranty period and a maximum mileage., regard to wobble, and the appropriate documentation must be, specified by the vehicle manufacturer must be observed., the designated use., the entitlement to make warranty claims is lost due to, There is no guarantee for inappropriate, improper or, third-party work. The same warranty claims are lost if the, tuning work such as wheel accessories and tracking plates,, unintended use., vehicle is used for motor sports or similar events., When replacing brakes, the chassis components must always be
1 373 ₽
без НДС
В налич.: 10+В налич.: 10+Под заказГотов к отправкеВремя обработки: Около 15 раб. днейHT: Около 15 раб. днейВремя обработки: Около 30 раб. днейHT: Около 30 раб. дней
Добавить в желаемоеpaypalVisaVisa ElectronMasterCardMaestro
Brake Disc VAICO V10-40068VAICOBrake DiscVAICOАртикул: V10-40068Bolt Hole Circle Ø [mm]: 112 mmBrake Disc Hub Height [mm]: 38 mmBrake Disc Thickness [mm]: 10 mmBrake Disc Type: SolidCentering Diameter [mm]: 68 mmFitting Position: Rear AxleHeight [mm]: 48 mmMinimum thickness [mm]: 8 mmOuter diameter [mm]: 245 mmPackaging height [cm]: 4,8 cmPackaging width [cm]: 24,5 cmRim Hole Number: 5 -HoleAdditional Info: measurement, including photos., Brake components such as brake disks, brake pads, etc., checked with regard to clearance and the wheel hub with, claims for brake parts are only reviewed with an, For brake disks and brake pads, the break-in requirements, If the vehicle is no longer in its original condition due to, In the warranty, we always make a distinction between wear, installation instructions., installation invoice and a record of the wheel hub run-out, Installation may only be carried out by trained specialist, maximum of 1000 km (break-in period). Therefore, warranty, parts and vehicle parts. All wear parts are subject to a, personnel., Please note that our products are usually delivered without, produced., Products supplied by us are without exception intended for, reduced warranty period and a maximum mileage., regard to wobble, and the appropriate documentation must be, specified by the vehicle manufacturer must be observed., the designated use., the entitlement to make warranty claims is lost due to, There is no guarantee for inappropriate, improper or, third-party work. The same warranty claims are lost if the, tuning work such as wheel accessories and tracking plates,, unintended use., vehicle is used for motor sports or similar events., When replacing brakes, the chassis components must always be
1 153 ₽
без НДС
В налич.: 10+В налич.: 10+Под заказГотов к отправкеВремя обработки: Около 15 раб. днейHT: Около 15 раб. днейВремя обработки: Около 30 раб. днейHT: Около 30 раб. дней
Добавить в желаемоеpaypalVisaVisa ElectronMasterCardMaestro
Brake Disc VAICO V10-40069VAICOBrake DiscVAICOАртикул: V10-40069Bolt Hole Circle Ø [mm]: 100 mmBrake Disc Hub Height [mm]: 25 mmBrake Disc Thickness [mm]: 8,9 mmBrake Disc Type: SolidCentering Diameter [mm]: 65 mmFitting Position: Rear AxleHeight [mm]: 33,4 mmMinimum thickness [mm]: 7 mmOuter diameter [mm]: 239 mmPackaging Depth [cm]: 26 cmPackaging height [cm]: 7 cmPackaging width [cm]: 26 cmRim Hole Number: 5 -HoleAdditional Info: Brake components such as brake disks, brake pads, etc., checked with regard to clearance and the wheel hub with, claims for brake parts are only reviewed with an, For brake disks and brake pads, the break-in requirements, If the vehicle is no longer in its original condition due to, In the warranty, we always make a distinction between wear, installation instructions., installation invoice and a record of the wheel hub run-out, Installation may only be carried out by trained specialist, maximum of 1000 km (break-in period). Therefore, warranty, measurement, including photos., parts and vehicle parts. All wear parts are subject to a, personnel., Please note that our products are usually delivered without, produced., Products supplied by us are without exception intended for, reduced warranty period and a maximum mileage., regard to wobble, and the appropriate documentation must be, specified by the vehicle manufacturer must be observed., the designated use., the entitlement to make warranty claims is lost due to, There is no guarantee for inappropriate, improper or, third-party work. The same warranty claims are lost if the, tuning work such as wheel accessories and tracking plates,, unintended use., vehicle is used for motor sports or similar events., When replacing brakes, the chassis components must always be
882 ₽
без НДС
В налич.: 10+В налич.: 10+Под заказГотов к отправкеВремя обработки: Около 15 раб. днейHT: Около 15 раб. днейВремя обработки: Около 30 раб. днейHT: Около 30 раб. дней
Добавить в желаемоеpaypalVisaVisa ElectronMasterCardMaestro
Brake Disc VAICO V10-80098VAICOBrake DiscVAICOАртикул: V10-80098Bolt Hole Circle Ø [mm]: 112 mmBrake Disc Hub Height [mm]: 21,1 mmBrake Disc Thickness [mm]: 25 mmBrake Disc Type: VentedCentering Diameter [mm]: 68 mmFitting Position: Front AxleHeight [mm]: 46,5 mmMinimum thickness [mm]: 23 mmOuter diameter [mm]: 288 mmPackaging Depth [cm]: 30 cmPackaging height [cm]: 10 cmPackaging width [cm]: 30 cmRim Hole Number: 10 -HoleAdditional Info: Brake components such as brake disks, brake pads, etc., checked with regard to clearance and the wheel hub with, claims for brake parts are only reviewed with an, For brake disks and brake pads, the break-in requirements, If the vehicle is no longer in its original condition due to, In the warranty, we always make a distinction between wear, installation instructions., installation invoice and a record of the wheel hub run-out, Installation may only be carried out by trained specialist, maximum of 1000 km (break-in period). Therefore, warranty, measurement, including photos., parts and vehicle parts. All wear parts are subject to a, personnel., Please note that our products are usually delivered without, produced., Products supplied by us are without exception intended for, reduced warranty period and a maximum mileage., regard to wobble, and the appropriate documentation must be, specified by the vehicle manufacturer must be observed., the designated use., the entitlement to make warranty claims is lost due to, There is no guarantee for inappropriate, improper or, third-party work. The same warranty claims are lost if the, tuning work such as wheel accessories and tracking plates,, unintended use., vehicle is used for motor sports or similar events., When replacing brakes, the chassis components must always be
2 381 ₽
без НДС
В налич.: 10+В налич.: 10+Под заказГотов к отправкеВремя обработки: Около 15 раб. днейHT: Около 15 раб. днейВремя обработки: Около 30 раб. днейHT: Около 30 раб. дней
Добавить в желаемоеpaypalVisaVisa ElectronMasterCardMaestro
Brake Disc VAICO V20-80066VAICOBrake DiscVAICOАртикул: V20-80066Bolt Hole Circle Ø [mm]: 120 mmBrake Disc Hub Height [mm]: 49,5 mmBrake Disc Thickness [mm]: 24 mmBrake Disc Type: VentedCentering Diameter [mm]: 79 mmFitting Position: Front AxleHeight [mm]: 73,1 mmMinimum thickness [mm]: 22,4 mmOuter diameter [mm]: 312 mmPackaging Depth [cm]: 32 cmPackaging height [cm]: 15 cmPackaging width [cm]: 32 cmRim Hole Number: 5 -HoleAdditional Info: Brake components such as brake disks, brake pads, etc., checked with regard to clearance and the wheel hub with, claims for brake parts are only reviewed with an, For brake disks and brake pads, the break-in requirements, If the vehicle is no longer in its original condition due to, In the warranty, we always make a distinction between wear, installation instructions., installation invoice and a record of the wheel hub run-out, Installation may only be carried out by trained specialist, maximum of 1000 km (break-in period). Therefore, warranty, measurement, including photos., parts and vehicle parts. All wear parts are subject to a, personnel., Please note that our products are usually delivered without, produced., Products supplied by us are without exception intended for, reduced warranty period and a maximum mileage., regard to wobble, and the appropriate documentation must be, specified by the vehicle manufacturer must be observed., the designated use., the entitlement to make warranty claims is lost due to, There is no guarantee for inappropriate, improper or, third-party work. The same warranty claims are lost if the, tuning work such as wheel accessories and tracking plates,, unintended use., vehicle is used for motor sports or similar events., When replacing brakes, the chassis components must always be
3 021 ₽
без НДС
В налич.: 10+В налич.: 10+Под заказГотов к отправкеВремя обработки: Около 15 раб. днейHT: Около 15 раб. днейВремя обработки: Около 30 раб. днейHT: Около 30 раб. дней
Добавить в желаемоеpaypalVisaVisa ElectronMasterCardMaestro
Brake Disc VAICO V22-40013VAICOBrake DiscVAICOАртикул: V22-40013Bolt Hole Circle Ø [mm]: 114,3 mmBrake Disc Hub Height [mm]: 48,7 mmBrake Disc Thickness [mm]: 10 mmBrake Disc Type: SolidCentering Diameter [mm]: 80 mmHeight [mm]: 60,1 mmMinimum thickness [mm]: 8,4 mmOuter diameter [mm]: 302 mmPackaging Depth [cm]: 32 cmPackaging height [cm]: 12 cmPackaging width [cm]: 32 cmRim Hole Number: 5 -HoleAdditional Info: Brake components such as brake disks, brake pads, etc., checked with regard to clearance and the wheel hub with, claims for brake parts are only reviewed with an, For brake disks and brake pads, the break-in requirements, If the vehicle is no longer in its original condition due to, In the warranty, we always make a distinction between wear, installation instructions., installation invoice and a record of the wheel hub run-out, Installation may only be carried out by trained specialist, maximum of 1000 km (break-in period). Therefore, warranty, measurement, including photos., parts and vehicle parts. All wear parts are subject to a, personnel., Please note that our products are usually delivered without, produced., Products supplied by us are without exception intended for, reduced warranty period and a maximum mileage., regard to wobble, and the appropriate documentation must be, specified by the vehicle manufacturer must be observed., the designated use., the entitlement to make warranty claims is lost due to, There is no guarantee for inappropriate, improper or, third-party work. The same warranty claims are lost if the, tuning work such as wheel accessories and tracking plates,, unintended use., vehicle is used for motor sports or similar events., When replacing brakes, the chassis components must always be
1 990 ₽
без НДС
В налич.: 10+В налич.: 10+Под заказГотов к отправкеВремя обработки: Около 15 раб. днейHT: Около 15 раб. днейВремя обработки: Около 30 раб. днейHT: Около 30 раб. дней
Добавить в желаемоеpaypalVisaVisa ElectronMasterCardMaestro
Brake Disc VAICO V22-80002VAICOBrake DiscVAICOАртикул: V22-80002Bolt Hole Circle Ø [mm]: 108 mmBrake Disc Hub Height [mm]: 14 mmBrake Disc Thickness [mm]: 13 mmBrake Disc Type: SolidCentering Diameter [mm]: 66 mmFitting Position: Front AxleHeight [mm]: 27,2 mmMinimum thickness [mm]: 11 mmOuter diameter [mm]: 266 mmPackaging Depth [cm]: 28 cmPackaging height [cm]: 6 cmPackaging width [cm]: 28 cmRim Hole Number: 4 -HoleAdditional Info: Brake components such as brake disks, brake pads, etc., checked with regard to clearance and the wheel hub with, claims for brake parts are only reviewed with an, For brake disks and brake pads, the break-in requirements, If the vehicle is no longer in its original condition due to, In the warranty, we always make a distinction between wear, installation instructions., installation invoice and a record of the wheel hub run-out, Installation may only be carried out by trained specialist, maximum of 1000 km (break-in period). Therefore, warranty, measurement, including photos., parts and vehicle parts. All wear parts are subject to a, personnel., Please note that our products are usually delivered without, produced., Products supplied by us are without exception intended for, reduced warranty period and a maximum mileage., regard to wobble, and the appropriate documentation must be, specified by the vehicle manufacturer must be observed., the designated use., the entitlement to make warranty claims is lost due to, There is no guarantee for inappropriate, improper or, third-party work. The same warranty claims are lost if the, tuning work such as wheel accessories and tracking plates,, unintended use., vehicle is used for motor sports or similar events., When replacing brakes, the chassis components must always be
1 301 ₽
без НДС
В налич.: 4Под заказГотов к отправкеВремя обработки: Около 30 раб. днейHT: Около 30 раб. дней
Добавить в желаемоеpaypalVisaVisa ElectronMasterCardMaestro
Brake Disc VAICO V22-80008VAICOBrake DiscVAICOАртикул: V22-80008Bolt Hole Circle Ø [mm]: 114,3 mmBrake Disc Hub Height [mm]: 21,7 mmBrake Disc Thickness [mm]: 24 mmBrake Disc Type: VentedCentering Diameter [mm]: 69 mmFitting Position: Front AxleHeight [mm]: 45,5 mmMinimum thickness [mm]: 22,4 mmOuter diameter [mm]: 294 mmPackaging Depth [cm]: 30 cmPackaging height [cm]: 10 cmPackaging width [cm]: 30 cmRim Hole Number: 5 -HoleAdditional Info: produced., measurement, including photos., Brake components such as brake disks, brake pads, etc., checked with regard to clearance and the wheel hub with, claims for brake parts are only reviewed with an, For brake disks and brake pads, the break-in requirements, If the vehicle is no longer in its original condition due to, In the warranty, we always make a distinction between wear, installation instructions., installation invoice and a record of the wheel hub run-out, Installation may only be carried out by trained specialist, maximum of 1000 km (break-in period). Therefore, warranty, parts and vehicle parts. All wear parts are subject to a, personnel., Please note that our products are usually delivered without, Products supplied by us are without exception intended for, reduced warranty period and a maximum mileage., regard to wobble, and the appropriate documentation must be, specified by the vehicle manufacturer must be observed., the designated use., the entitlement to make warranty claims is lost due to, There is no guarantee for inappropriate, improper or, third-party work. The same warranty claims are lost if the, tuning work such as wheel accessories and tracking plates,, unintended use., vehicle is used for motor sports or similar events., When replacing brakes, the chassis components must always be
1 957 ₽
без НДС
В налич.: 10+В налич.: 10+Под заказГотов к отправкеВремя обработки: Около 15 раб. днейHT: Около 15 раб. днейВремя обработки: Около 30 раб. днейHT: Около 30 раб. дней
Добавить в желаемоеpaypalVisaVisa ElectronMasterCardMaestro
Brake Disc VAICO V25-40006VAICOBrake DiscVAICOАртикул: V25-40006Bolt Hole Circle Ø [mm]: 108 mmBrake Disc Hub Height [mm]: 39,7 mmBrake Disc Thickness [mm]: 10,9 mmBrake Disc Type: SolidCentering Diameter [mm]: 63,5 mmFitting Position: Rear AxleHeight [mm]: 50,8 mmMinimum thickness [mm]: 9 mmOuter diameter [mm]: 302 mmPackaging Depth [cm]: 32 cmPackaging height [cm]: 11 cmPackaging width [cm]: 32 cmRim Hole Number: 5 -HoleAdditional Info: Brake components such as brake disks, brake pads, etc., checked with regard to clearance and the wheel hub with, claims for brake parts are only reviewed with an, For brake disks and brake pads, the break-in requirements, If the vehicle is no longer in its original condition due to, In the warranty, we always make a distinction between wear, installation instructions., installation invoice and a record of the wheel hub run-out, Installation may only be carried out by trained specialist, maximum of 1000 km (break-in period). Therefore, warranty, measurement, including photos., parts and vehicle parts. All wear parts are subject to a, personnel., Please note that our products are usually delivered without, produced., Products supplied by us are without exception intended for, reduced warranty period and a maximum mileage., regard to wobble, and the appropriate documentation must be, specified by the vehicle manufacturer must be observed., the designated use., the entitlement to make warranty claims is lost due to, There is no guarantee for inappropriate, improper or, third-party work. The same warranty claims are lost if the, tuning work such as wheel accessories and tracking plates,, unintended use., vehicle is used for motor sports or similar events., When replacing brakes, the chassis components must always be
1 660 ₽
без НДС
В налич.: 5Под заказГотов к отправкеВремя обработки: Около 30 раб. днейHT: Около 30 раб. дней
Добавить в желаемоеpaypalVisaVisa ElectronMasterCardMaestro
Brake Disc VAICO V25-80016VAICOBrake DiscVAICOАртикул: V25-80016Bolt Hole Circle Ø [mm]: 108 mmBrake Disc Hub Height [mm]: 20,2 mmBrake Disc Thickness [mm]: 24 mmBrake Disc Type: VentedCentering Diameter [mm]: 63,5 mmFitting Position: Front AxleHeight [mm]: 44,5 mmMinimum thickness [mm]: 22 mmOuter diameter [mm]: 278 mmPackaging Depth [cm]: 28 cmPackaging height [cm]: 9 cmPackaging width [cm]: 28 cmRim Hole Number: 5 -HoleAdditional Info: Brake components such as brake disks, brake pads, etc., checked with regard to clearance and the wheel hub with, claims for brake parts are only reviewed with an, For brake disks and brake pads, the break-in requirements, If the vehicle is no longer in its original condition due to, In the warranty, we always make a distinction between wear, installation instructions., installation invoice and a record of the wheel hub run-out, Installation may only be carried out by trained specialist, maximum of 1000 km (break-in period). Therefore, warranty, measurement, including photos., parts and vehicle parts. All wear parts are subject to a, personnel., Please note that our products are usually delivered without, produced., Products supplied by us are without exception intended for, reduced warranty period and a maximum mileage., regard to wobble, and the appropriate documentation must be, specified by the vehicle manufacturer must be observed., the designated use., the entitlement to make warranty claims is lost due to, There is no guarantee for inappropriate, improper or, third-party work. The same warranty claims are lost if the, tuning work such as wheel accessories and tracking plates,, unintended use., vehicle is used for motor sports or similar events., When replacing brakes, the chassis components must always be
1 990 ₽
без НДС
В налич.: 10+В налич.: 10+Под заказГотов к отправкеВремя обработки: Около 15 раб. днейHT: Около 15 раб. днейВремя обработки: Около 30 раб. днейHT: Около 30 раб. дней
Добавить в желаемоеpaypalVisaVisa ElectronMasterCardMaestro